Classic Mini Specilalist Performance Parts

Polyurethene is now widely used as a direct replacement for the standard factory fitted rubber bushes and suspension joints.The benifits of polyurethene is it's durability, resistance to wear and insulating properties without adding undue harshness to ride quality or noise. When these are used together it helps prevent geometry changes during acceleration and braking.
-Note poly bushes are in the hardness range of 60- 80 shore (medium to hard) excessive heat effects polyurethane .

Polyflex -uk have been producing poly bushes for classic mini's for 25yrs and have sold 1000's of sets world wide, currently we are in the process of adding these to the Avonbar Racing web site, to see the range please visit the minimine -Ltd Ebay shop, or ring us on 01782 595999 for details...

Front Subframe Alloy Tower Mounts

Front Subframe Alloy Tower Mounts Car set of 4. Upper and Lower. Fits subframes from 1970 onwards

Front Subframe Alloy Tower Mounts

ABR013/1

£17.95
Superflex Bottom Arm Bush 1 Piece 80 degree hardness

Superflex Lower/Bottom Arm Bush 1 Piece with Stainless Steel Sleeve.Car set. Easy fit Stabilises suspension under heavy braking and acceleration. 80 degree hardness ( normal bushes are approx 30 degree )

Superflex Bottom Arm Bush 1 Piece 80 degree hardness

PFAB-101

Powerflex. THE Ultimate Bottom Arm Poly Bush, Drasically reduce all laterall movement on the bottom arm unlike the 2 piece bushes, You only need fit them once so fit the best

£17.50
Powerflex Engine Steady Bush kit

Superflex1 Piece engine steady bush kit Fits the standard upper Engine Tie Rod Including our Left hand drive Engine steady as an Upgrade.

Powerflex Engine Steady Bush kit

EPF213

These are THE ultimate in heavy duty engine steady bushes, a one piece poly bush that can easily be pressed into the tie rod with a vice. Direct replacement for the original rubber split ones.

£12.95
Superflex Suspension Classic Mini Tie Rod Bushes

Superflex Suspension Classic Mini Tie Rod Bushes. Fit the Best Direct Replacement 60 degree hardness ( Standard Bushes are 40 degree hardness ) Set of 4.

Superflex Suspension Classic Mini Tie Rod Bushes

PFAB-103

£19.95
Competition Front Subframe Mounting Kit

Complete Kit Competition Front Subframe Mounting Kit.

Competition Front Subframe Mounting Kit

AVR013

Kit contains: 4 alloy subframe tower bolt spacers and 2 hi-tech super strong fabricated rear subframe to body mounts.(our Lower Front Subframe mounts must not be confused with poor quality brackets sold by others).

£36.95
Front Subframe To Body Mounts

Front Subframe To Body Mounts

ABR013/2

These are the ultimate floor mounts. Not to be compared with lesser quality copies.

£22.95Pair
Powerflex Rear Subframe Poly Bush Kit, Early to 83

Powerflex Rear Subframe Poly Bush Kit, Early to 83 60 degree hardness

Powerflex Rear Subframe Poly Bush Kit, Early to 83

ABR2166

£14.00
Powerflex Rear Subframe Poly Bush Kit, Late 83 on

Powerflex Rear Subframe Poly Bush Kit, Late 83 on 60 degree hardness Fit and forget.

Powerflex Rear Subframe Poly Bush Kit, Late 83 on

ABR92B

£16.75
Tear Drop Replacement Mountings Solid Alloy

Tear Drop Replacement Mountings Solid Alloy

ABR247

These mounts are located at the front of the front subframe. The original rubber mounts are prone to braking. Solid mounts are a good idea on a fast road vehicle.

£16.50